Exhaust Muffler Oil mist eliminator for Oiled Rotary Vacuum Pump: oil repellent Filtered Fit VIOT & Other Manufacturers Model Muf6O 3/4 NPT

Vacuum Pump Exhaust Muffler Oil Mist Eliminator: for VIOT and Other Selected Models of Vacuum Pumps;

Why this is needed: Every rotary vane vacuum pump has an unintentional byproduct: Oil mist. Because the vacuum pump oil is a volatile liquid, when it lubricate the moving parts, and the moving parts will move part of the lubricant out in the exhaust stream. If the pump is used out door air, you may not feel the oil, but if you are using the vacuum pump in a closed space, the room may get "smoky" after operating the pump for a while. Faster the air passing through the pump, more oil mist is likely to come out of the muffler, higher the vacuum level, lesser the air flow, but faster the evaporation, which will cause greasy air too. This muffler is designed and used to ease this problem.

How it is connected: this muffler come with a 3/4 inch male pipe thread. It can be used directly on VIOT rotary vane vacuum pumps:VPD12a, VPDS10, VPD8, VPD5, VPDS5. VPD3, VPDS3. This will fit on pumps with 25 mm metric exhaust port. Consult with your pump manufacture or adapter is needed.

Features:

• Built with steel case of a large profile for more air flow
• Lined with oil repulsive layer so the oil mist will not get exhausted.
• Filled with oil tolerant material to absorb and drain oil back to the oil reservoir.
• Lined with filter glass layer to absorb the sound wave to reduce the noise.
• Dimensions:8.0 H X 3.5 X 3.5 inch.
  Connection to Pump: 3/4 Pipe or 27 mm male metric thread
  Oil drain: oil drops will flow back to pump.
  Note: This oil eliminator works really well with true natural oil base vacuum pump oil; some synthetic oil mist may still pass through because the nature of the "oil" has been changed and made it more hydrophilic.