Oiled Rotary Vacuum Pump Exhaust Muffler: for VIOT & Other Manufactuers Model Muf6 3/4 NPT

$49.97

  • Model:Muf6
Product may vary slightly from image representation.

Vacuum Pump Exhaust Muffler: for VIOT and Other Selected Models of Vacuum Pumps;

Why this is needed: Every rotary vane vacuum pump has an unintentional byproduct: Oil mist. Because the vacuum pump oil is a volatile liquid, when it lubricate the moving parts, and the moving parts will move part of the lubricant out in the exhaust stream. If the pump is used out door air, you may not feel the oil, but if you are using the vacuum pump in a closed space, the room may get "smoky" after operating the pump for a while. Faster the air passing through the pump, more oil mist is likely to come out of the muffler, higher the vacuum level, lesser the air flow, but faster the evaporation, which will cause greasy air too. This muffler is designed and used to ease this problem.

How it is connected: this muffler come with a 3/4 inch male pipe thread. It can be used directly on VIOT rotary vane vacuum pumps:VPD12a, VPDS10, VPD8, VPD5, VPDS5. VPD3, VPDS3. This will fit on pumps with 25 mm metric exhaust port. Consult with your pump manufacture or adapter is needed.

Features:

  • Built with steel case of a large profile for more air flow
  • Lined with fiberglass layer to absorb the sound wave to reduce the noise.
  • The fiberglass layer layer effectively remove oil drops from the exhaust stream to reduce the oil mist output.
  • Dimensions:8.0 H X 3.5 X 3.5 inch.
    Connection to Pump: 3/4 inch Pipe or 27 mm metric thread
    Oil drain: oil drops will flow back to pump.
    • Note: the best oil mist removing muffler is model MUF6O.